THC Artemis V1.5 RDTA

• Brand: ThunderHead Creations
• Unit: set
• Type: RDTA
  
• Net Weight: 68(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

ThunderHead Creations Artemis V1.5 RDTA is the sequel of the collaboration between ThunderHead Creations and TNYVPS. The main changes from the previous generation Artemis RDTA are size and capacity. It a modern and optically very attractive single coil BF atomizer, which is especially suitable for DL-vaping. With its diameter of 24 mm the Artemis V1.5 RDTA can be combined with a variety of battery carriers and mods - it will certainly convince you all along the line with its perfect characteristics and the ideal vaping experience. The height is slightly lower than the previous generation. Now due to the low height, the need to feed cotton with metal wires has disappeared. The top is an 810 wide hole drip tip made of resin. In terms of capacity, Artemis V1.5 RDTA has been reduced, but it provides two options for capacity changes. 2ml & 4ml in one device. After removing the out cap and inner cap, a spacious and column-free single-coil platform will appear. The postless deck is fairly easy to build on but can only accommodate a single coil. The bottom of the deck uses a strong ceramic clamp system to fix the coil legs. Tighten it with a gold-plated M4 Screw from the side. The fill port is rather wide and is located on the deck's upper side. The Artemis V1.5 RDTA can also be used as a squonker, because it comes with the matching squonk pin - in this case, the filling is done through the 510 connector from below, otherwise through a sufficiently large opening on the side. ThunderHead Creations Artemis V1.5 RDTA boasts adjustable side airflow that's honeycombed with 26 holes. It helped produce pretty decent flavor and also heaps of clouds. The airflow on both sides again passes through the special metal insert in the dome floor from the bottom of the deck at an angle. Come with a BF pin, so you can indeed use it with squonk mods.

Features

• Strong Ceramic Clamp System

• Honeycomb Airflow Design

• Convenient Side Fill Port

• Compatible To 2&4ML In One Design

• Single Screw Postless Build Deck

• Single Coil Configuration

• Wide Slot Side Fill Port

• Side Secured via Single M4 Screw

• 810 Resin Drip Tip

• Bottom Feeding 510 Squonk Connection

• Collaboration with TNYVPS

1 x Artemis RDTA V1.5

1 x 4ML Glass Tank

1 x Accessories Pack

2 x Fused Clapton Coil

1 x User Manual

1 x QC Card

1 x Warranty Card

3 Months for Vape Mods. Vape Tanks & Accessories are DOA(Dead On Arrival), please contact us within 72 hours of delivery.

Attention:As the manufacturer needs the serial number to provide a replacement, we highly recommend you keep the original packing box or take picture of the code before discarding it. Thank you!